Penrite Classic Light – 5 litre

Penrite Classic Light is an SAE 20W-60, high zinc, low detergent engine oil designed specifically for petrol and diesel fuelled vehicles manufactured between 1950 and 1989. It features a double layer of engine wear protection with high zinc and increased operating temperature viscosity over older style multigrade oils or where SAE 30 monograde oil was specified by the manufacturer. It controls oil consumption and maintains oil pressure in older engines.

Classic Light is an API SG/CD grade oil and contains high zinc levels for added anti-wear protection for older engines.

Classic Light features a standard multigrade cold temperature SAE viscosity grade with an increased operating temperature range that provides an added layer of protection for the engine, especially under increased load and temperature conditions. Multigrade oils provide better start up protection and better protection at operating temperature than monograde oils and they do not need to be changed in winter and summer as they used to do.

Classic Light contains a “Tacky Additive” so that when the vehicles are laid up, the engine oil doesn’t run off the internal surfaces. This combined with an increased level of rust inhibitor, provides protection against corrosion and deterioration when the engine is not used or in storage.

Classic Light is suitable for use in motor cycles fitted with a wet clutch.

• Formulated to give much improved low temperature pumpability
• Improves operating temperature wear protection
• Extends bearing and gear life by minimising wear and shock loads
• Minimises sludge build up, bearing corrosion and piston ring sticking
• Formulated specifically for vehicles manufactured from 1950 – 1989
• Optimised zinc levels for wear protection
• 5 Litre

NOTE: when changing oil, Penrite recommend using an engine flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.

PRODUCT PERFORMANCE LEVELS

• API SG
• API SG/CD

SUITABLE FOR USE WHERE SPECIFICATIONS BELOW ARE REQUIRED

• API SF